View S8X8ES1_4457745.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
SxX8xSx EV Series 0.8A Sensitive SCR
Description New device series offers high static dv/dt and lower turn off (tq) sensitive SCR with its small die planar construction SCRs junctions are glass-passivated to ensure long term reliability and parametric stability. Features
mount packages Main Features
Symbol IT(RMS) VDRM / VRRM I Value 0.8 400 to 800 5 to 200 Unit A V A
< 25 sec
q
)
capability > 10Amps ( VDRM / VRRM ) capability - up to 800V Schematic Symbol
A
microprocessor interface
Applications x
G
applications.
K
Absolute Maximum Ratings
Symbol Parameter TO-92 IT(RMS) RMS on-state current (full sine wave) SOT-89 SOT-223 TO-92 IT(AV) Average on-state current SOT-89 SOT-223 TO-92 SOT-89 SOT-223 tp = 10 ms tp = 8.3 ms TO-92 SOT-89 SOT-223 tp = 10 s -- -- -- TC = 55C TC = 60C TL = 60C TC = 55C TC = 60C TL = 60C F= 50Hz F= 60Hz F = 50 Hz F = 60 Hz TJ = 125C TJ = 125C TJ = 125C -- -- Value 0.8 0.8 0.8 0.51 0.51 0.51 8 10 0.32 0.41 50 1.0 0.1 -40 to 150 -40 to 125 Unit A A A A A A A A A 2s A2s A/s A W C
ITSM I 2t di/dt I P Tstg TJ
Non repetitive surge peak on-state current (Single cycle, TJ initial = 25C) I2t Value for fusing Critical rate of rise of on-state current I = 10mA
Average gate power dissipation Storage junction temperature range Operating junction temperature range
www.littelfuse.com (c)2008 Littelfuse
145 Power Thyristor Databook
SxX8xSx EV Series 0.8A Sensitive SCR
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Electrical Characteristics (TJ = 25C, unless otherwise specified)
SxX8xxx Symbol Description Test Conditions VD = 6V RL = 100 VD = 6V RL = 100 I Holding Current Critical Rate-of-Rise of Off-State Voltage R = 10A = 1 K Limit MIN. MAX. MAX. MIN. MAX. S1 0.5 5 S2 1 50 0.8 5 5 S 15 200 Unit A A V V mA
I V V IH (dv/dt)s
TJ = 125C VD = VDRM /VRRM Exp. Waveform R =1 k TJ = 25C @ 600 V R =1 k I =10mA PW = 15sec IT = 1.6A(pk)
MIN.
75
V/s
tq tgt
Turn-Off Time
MAX.
30
25
25
s
Turn-On Time
MAX.
2.0
2.0
2.0
s
Static Characteristics (TJ = 25C, unless otherwise specified)
Symbol VTM IDRM Description Peak On-State Voltage Test Conditions ITM = 1.6A (pk) TJ = 25C @ VD = VDRM R =1 k TJ = 125C @ VD = VDRM R =1 k Limit MAX. MAX. MAX. Value 1.70 3 500 Unit V A A
Off-State Current, Peak Repetitive
Thermal Resistances
Symbol Description Test Conditions TO-92 Rth(j-c) Junction to case (AC) IT = 0.8A (RMS)1 SOT-223 SOT-89 TO-92 Rth(j-a) Junction to ambient IT = 0.8A (RMS)1 SOT-223 SOT-89
1
Value 75 30 50 150 60 90
Unit C/W C/W C/W C/W C/W C/W
60Hz AC resistive load condition, 100% conduction.
SxX8xSx EV Series 0.8A Sensitive SCR
146 Power Thyristor Databook
www.littelfuse.com (c)2008 Littelfuse
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Figure 1: Normalized DC Gate Trigger Current For All Quadrants vs. Junction Temperature
2.0
Figure 2: Normalized DC Holding Current vs. Junction Temperature
4.0
IGT IGT (TJ = 25C)
1.5
3.0 IH (TJ = 25C)
IH
1.0
2.0
Ratio of
0.5
Ratio of
-40 -15 +25 +65 +105 +125
1.0
0.0
0.0 -55 -35 -15 +5 +25 +45 +65 +85 +105 +125
Junction Temperature (TJ) - C
Junction Temperature (TJ) - C
Figure 3: Normalized DC Gate Trigger Voltage vs. Junction Temperature
1.0
Figure 4: Power Dissipation (Typical) vs. RMS On-State Current
0.8
Average On-state Power Dissipation [PD(AV) ] - Watts
CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o
0.9 0.8 Gate Trigger Voltage (VGT) - V 0.7 0.6 0.5 0.4 0.3 0.2 -40 -25 -10 +5 +20 +35 +50 +65 +80 +95 +110 +125
0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0.0
Junction Temperature (TJ) - C
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
RMS On-state Current [I T(RMS) ] - Amps
Figure 5: Maximum Allowable Case Temperature vs. On-State Current
130
Maximum Allowable Case Temperature (TC ) - oC
CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180o CASE TEMPERATURE: Measured as shown on dimensional drawings
120 110 100 90 TO-92 80 70 60 50 0.0 0.1 0.2 0.3
SOT-223 & SOT-89
0.4
0.5
0.6
0.7
0.8
RMS On-state Current [I T(RMS) ] - Amps
www.littelfuse.com (c)2008 Littelfuse
147 Power Thyristor Databook
SxX8xSx EV Series 0.8A Sensitive SCR
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Figure 6: Surge Peak On-State Current vs. Number of Cycles
Peak Surge (Non-repetitive) On-State Current (IT S M) - Amps .
20
Supply Frequency: 60Hz Sinusoidal Load: Resistive RMS On-State Current [IT(RMS)]: Max Rated Value at Specific Case Temperature Notes: following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value.
0. 8
10 9 8 7 6 5 4 3 2
AD e vic e
s
1 1 2 3 4 5 6 7 8 9 10 20 30 40 60 80 100 200 300 400 600 1000
Surge Current Duration - Full Cycle
Soldering Parameters
Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (Liquidus Temp) (TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) 260+0/-5 C 5C/second max 5C/second max 217C 150C 200C
Peak Temperature (TP) Time within 5C of actual peak Temperature (tp) Ramp-down Rate Time 25C to peak Temperature (TP) Do not exceed
5C/second max 8 minutes Max. 280C
SxX8xSx EV Series 0.8A Sensitive SCR
148 Power Thyristor Databook
www.littelfuse.com (c)2008 Littelfuse
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Physical Specifications
Terminal Finish 100% Matte Tin-plated. UL recognized epoxy meeting flammability classification 94V-0. Copper Alloy
Reliability/Environmental Tests
Test AC Blocking Specifications and Conditions MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 110C for 1008 hours MIL-STD-750, M-1051, 100 cycles; -40C to +150C; 15-min dwell-time EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85C; 85% rel humidity MIL-STD-750, M-1031, 1008 hours; 150C 1008 hours; -40C MIL-STD-750, M-1056 10 cycles; 0C to 100C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature EIA / JEDEC, JESD22-A102 168 hours (121C at 2 ATMs) and 100% R/H MIL-STD-750 Method 2031 ANSI/J-STD-002, category 3, Test A MIL-STD-750, M-2036 Cond E
Body
Temperature Cycling
Lead Material
Temperature/ Humidity
Design Considerations Careful selection of the correct device for the application's operating parameters and environment will go a long way design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage.
High Temp Storage Low-Temp Storage
Thermal Shock
Autoclave Resistance to Solder Heat Solderability Lead Bend
Dimensions - TO-92
Inches Dimensions Min A B C D E F 0.175 0.170 0.500 0.135 0.125 0.080 0.016 H I J 0.045 0.095 0.015 Typ -- -- -- 0.165 -- 0.095 -- 0.050 0.100 -- Max 0.205 0.210 -- -- 0.165 0.105 0.021 0.055 0.105 0.020 Min 4.450 4.320 12.700 3.430 3.180 2.040 0.407 1.150 2.420 0.380 Typ -- -- -- 4.190 -- 2.400 -- 1.270 2.540 -- Max 5.200 5.330 -- -- 4.190 2.660 0.533 1.390 2.660 0.500 Millimeters
www.littelfuse.com (c)2008 Littelfuse
149 Power Thyristor Databook
SxX8xSx EV Series 0.8A Sensitive SCR
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Dimensions - SOT-223
Inches Dimensions Min A B
3.3 (0.130")
Millimeters Max 0.264 0.146 0.071 0.004 0.124 0.034 -- -- 0.287 0.014 Min 6.30 3.30 -- 0.02 2.90 0.60 -- -- 6.70 0.24 Typ 6.50 3.50 -- -- 3.00 0.70 2.30 4.60 7 .00 0.26 Max 6.70 3.70 1.80 0.10 3.15 0.85 -- -- 7 .30 0.35
Typ 0.256 0.138 -- -- 0.118 0.027 0.090 0.181 0.276 0.010
0.248 0.130 -- 0.001 0.114 0.024 --
C D
1.5 (0.059")
E
1.2 (0.047") (3x) 2.3 (0.091") 6.4 (0.252")
F
1.5 (0.059") 4.6 (0.181")
H I J K
-- 0.264 0.009
Dimensions in Millimeters (Inches)
10 MAX
Recommended Soldering Footprint for SOT223
Dimensions - SOT-89
A J Tc Measuring Point C
B
D H
E
F G
Inches Dimension Min A 0.173 0.090 0.055 0.115 0.035 0.056 0.115 H 0.014 0.014 0.064 Typ -- -- -- -- -- -- -- -- -- -- Max 0.181 0.102 0.063 0.121 0.047 0.062 0.121 0.017 0.019 0.072 Min 4.40 2.29 1.40 3.94 0.89 1.42 2.92 0.35 0.36 1.62
Millimeters Typ -- -- -- -- -- -- -- -- -- -- Max 4.60 2.60 1.60 4.25 1.20 1.57 3.07 0.44 0.48 1.83
Pad Layout for SOT-89
(2.21) .087
B C D E
(3.91) .154
(1.12) .044
F
(1.19) .047
(0.91) .036
(1.63) .064
(1.63) .064
I J
150 Power Thyristor Databook
Dimensions in Millimeters (Inches)
SxX8xSx EV Series 0.8A Sensitive SCR
www.littelfuse.com (c)2008 Littelfuse
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Product Selector
Part Number S4X8ES S6X8ES S8X8ES S4X8TS S6X8TS S8X8TS S4X8BS S6X8BS S4X8ES1 S6X8ES1 S8X8ES1 S4X8TS1 S6X8TS1 S8X8TS1 S4X8ES2 S6X8ES2 S8X8ES2 S4X8TS2 S6X8TS2 S8X8TS2 Voltage 400V X -- -- X -- -- X -- X -- -- X -- -- X -- -- X -- -- 600V -- X -- -- X -- -- X -- X -- -- X -- -- X -- -- X -- 800V -- -- X -- -- X -- -- -- -- X -- -- X -- -- X -- -- X Gate Sensitivity 200 A 200 A 200 A 200 A 200 A 200 A 200 A 200 A 5 A 5 A 5 A 5 A 5 A 5 A 50 A 50 A 50 A 50 A 50 A 50 A Package TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 SOT-89 SOT-89 TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223 TO-92 TO-92 TO-92 SOT-223 SOT-223 SOT-223
Packing Options
Part Number SxX8ESy SxX8ESyAP SxX8ESyRP SxX8TSyRP SxX8BSRP Marking SxX8ESy SxX8ESy SxX8ESy SxX8TSy xX8 Weight 0.170g 0.170g 0.170g 0.120g 0.053g Packing Mode Bulk Ammo Pack Tape & Reel Tape & Reel Tape & Reel Base Quantity 2500 2000 2000 1000 1000
Note: x = voltage, y = gate sensitivity
www.littelfuse.com (c)2008 Littelfuse
151 Power Thyristor Databook
SxX8xSx EV Series 0.8A Sensitive SCR
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
TO-92 (3-lead) Reel Pack (RP) Radial Leaded Meets all EIA-468-B 1994 Standards
1.6 (41.0)
0.236 (6.0)
0.02 (0.5)
0.098 (2.5) MAX
1.26 (32.0)
0.708 (18.0)
0.354 (9.0) 0.5 (12.7) 0.1 (2.54) 14.17(360.0) MT1 / Cathode 0.2 (5.08) MT2 / Anode 0.157 DIA (4.0)
Gate
Flat up
1.97 (50.0) Dimension s are in inches (and millimeters).
Direction of Feed
TO-92 (3-lead) Ammo Pack (AP) Radial Leaded Meets all EIA-468-B 1994 Standards
0.236 (6.0) 1.62 (41.2) 0.708 (18.0)
0.02 (0.5)
0.098 (2.5) MAX
1.27 (32.2)
0.354 (9.0) 0.5 (12.7) 0.1 (2.54) MT2 / Anode 0.2 (5.08) MT1 / Cathode 0.157 (4.0) DIA
Gate
Flat down
n of Fe Directio ed
25 Devices per fold
1.85 (47.0)
12.2 (310.0) Dimensions are in inches (and millimeters).
1.85 (47.0) 13.3 (338.0)
SxX8xSx EV Series 0.8A Sensitive SCR
152 Power Thyristor Databook
www.littelfuse.com (c)2008 Littelfuse
Teccor(R) brand Thyristors
Silicon Controlled Rectifiers
Tape & Reel Specifications for SOT-89
O1.5 mm 4 mm 8 mm 2 mm ANODE 1.75 mm 5.5 mm
12 mm
GATE
ANODE
CATHODE
180 mm 13 mm Abor Hole Diameter
13.4 mm
DIRECTION OF FEED
Tape & Reel Specifications for SOT-223
O1.5 mm 4 mm 8 mm 2 mm ANODE 1.75 mm 5.5 mm
12 mm
GATE
ANODE
CATHODE
180 mm 13 mm Abor Hole Diameter
13.4 mm
DIRECTION OF FEED
Part Numbering System
Part Marking System
DC Date Code (2 Digits Min.) Number = Year Letter = Month
S xX8 x xx xx
SERIES S: SCR VOLTAGE 4: 400V 6: 600V 8: 800V CURRENT X8: 0.8A PACKING TYPE Blank: Bulk Pack RP: Reel Pack (TO-92) Embossed Carrier Pack (SOT-223) Embossed Carrier Pack (SOT-89) AP: Ammo Pack (TO-92) SENSITIVITY & TYPE S1: 5A Sensitive SCR S2: 50A Sensiive SCR S: 200A Sensitive SCR PACKAGE TYPE E: TO-92 T: SOT-223 B: SOT-89
www.littelfuse.com (c)2008 Littelfuse 153
A
K K A G G A
SxX8xSx EV Series 0.8A Sensitive SCR
Power Thyristor Databook

▲Up To Search▲

Price & Availability of S8X8ES1

	To Download S8X8ES1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .